RECI W4 120 WATT CO2 LASER TUBE FOR RM1390/1610 PRO
Now in the third generation of development, Reci W Series CO₂ Laser Tubes have become known for excellent performance and consistency.
✅Advanced radioactive materials coated lenses
✅Distinctive metal-glass sintering techniques
✅Long life – up to 10,000 hours with relatively low yearly maintenance
✅Great for engraving acrylic, cardboard, ceramics, glass, leather, paper, stone, wood, etc.
📦Please allow 1 week for delivery
Specifications
|
Model: |
W4 |
|
Rated Power: |
100 W |
|
Peak Power: |
130 W |
|
Length: |
1400 mm |
|
Diameter: |
80 mm |
|
Catalytic: |
Yes |
|
Warranty: |
540 days |
|
Triggering Voltage: |
24 kV |
|
Recommended Current: |
26 mA |
Installation and Usage
- Connect the positive and negative of laser tube with power supply, and insulate it properly.
- Use the 4mm soft pipe, connect the water inlet and outlet of the laser tube.
- Turn on the water circulation, so that the cooling water flows through the entire water line and avoid any air bubbles. Otherwise there is a risk of burst pipes.
- Start inching, and then the laser tube will emit the laser light. Adjust the position of the laser tube so that the spot hits in the middle of the reflective mirror.
- If the light is not correct, please adjust the position of the laser lens until light adjustment is complete.
- When the laser tube is first working, please generally adjust 50%-60% of the power to work.
Length A: Length of the tube
Length B: Recommended distance from the ends of laser tube to pipe rack
Length C: Diameter of laser tube
Unit: mm
FAQs
Q: What are the operating conditions of the laser tube？
A: Water cooling: it is recommended that the coolant be pure water, with a flow rate of 2-5 liters per minute and a standard water temperature of 10 ℃-50 ℃. Operating environment: temperature 2-40 ℃, humidity 10% - 60%.
Q: How do I match the DY power supply for the RECI W series laser tubes?
A: We recommend the W1 laser tube to work with DY10 power supply, W2 laser tube to work with DY13 power supply, and W4,W6,W8 laser tubes to work with DY20 power supply.
Q: Is it difficult to deal with after-sales problems?
A: It's easy to deal with after-sales problems with us. Please contact with us directly.
Normally, it will take 1-2 working days to resend the replacement for the shipping damage and product fault (not including improper operation) after the problem was confirmed.
Q: Why can't my tube reach the high power listed?
A: We are able to guarantee the rated/agreement power, but we can't guarantee the peak power. The actual power of each tube is between rated power and peak power.
Q: What's the difference between W and T series?
A: T and W series tubes are produced using the same process. The W series began production in 2008, and the T series is a more affordable series launched in 2019. The diameter of W series is larger than that of T series, and the warranty time is slightly longer than that of T series.
Q: Which is the most common power in the marking machine?
A: The common power ratings are 90W, 100W and 130W in the machine. The models are the W2, W4, W6 & T2, T4, T6 respectively.
Guaranteed safe & secure checkout
- Catalog
- CO2 Laser Tubes
Now in the third generation of development, Reci W Series CO₂ Laser Tubes have become known for excellent performance and consistency.
✅Advanced radioactive materials coated lenses
✅Distinctive metal-glass sintering techniques
✅Long life – up to 10,000 hours with relatively low yearly maintenance
✅Great for engraving acrylic, cardboard, ceramics, glass, leather, paper, stone, wood, etc.
📦Please allow 1 week for delivery
Specifications
|
Model: |
W4 |
|
Rated Power: |
100 W |
|
Peak Power: |
130 W |
|
Length: |
1400 mm |
|
Diameter: |
80 mm |
|
Catalytic: |
Yes |
|
Warranty: |
540 days |
|
Triggering Voltage: |
24 kV |
|
Recommended Current: |
26 mA |
Installation and Usage
- Connect the positive and negative of laser tube with power supply, and insulate it properly.
- Use the 4mm soft pipe, connect the water inlet and outlet of the laser tube.
- Turn on the water circulation, so that the cooling water flows through the entire water line and avoid any air bubbles. Otherwise there is a risk of burst pipes.
- Start inching, and then the laser tube will emit the laser light. Adjust the position of the laser tube so that the spot hits in the middle of the reflective mirror.
- If the light is not correct, please adjust the position of the laser lens until light adjustment is complete.
- When the laser tube is first working, please generally adjust 50%-60% of the power to work.
Length A: Length of the tube
Length B: Recommended distance from the ends of laser tube to pipe rack
Length C: Diameter of laser tube
Unit: mm
FAQs
Q: What are the operating conditions of the laser tube？
A: Water cooling: it is recommended that the coolant be pure water, with a flow rate of 2-5 liters per minute and a standard water temperature of 10 ℃-50 ℃. Operating environment: temperature 2-40 ℃, humidity 10% - 60%.
Q: How do I match the DY power supply for the RECI W series laser tubes?
A: We recommend the W1 laser tube to work with DY10 power supply, W2 laser tube to work with DY13 power supply, and W4,W6,W8 laser tubes to work with DY20 power supply.
Q: Is it difficult to deal with after-sales problems?
A: It's easy to deal with after-sales problems with us. Please contact with us directly.
Normally, it will take 1-2 working days to resend the replacement for the shipping damage and product fault (not including improper operation) after the problem was confirmed.
Q: Why can't my tube reach the high power listed?
A: We are able to guarantee the rated/agreement power, but we can't guarantee the peak power. The actual power of each tube is between rated power and peak power.
Q: What's the difference between W and T series?
A: T and W series tubes are produced using the same process. The W series began production in 2008, and the T series is a more affordable series launched in 2019. The diameter of W series is larger than that of T series, and the warranty time is slightly longer than that of T series.
Q: Which is the most common power in the marking machine?
A: The common power ratings are 90W, 100W and 130W in the machine. The models are the W2, W4, W6 & T2, T4, T6 respectively.
